Rubber trimming machine with two knives
Multifunctional Edge trimming machine
can cut edge for oilseal,sealcup and others objects
Manual feed
Automatic cut
1.General description
This machine is used for cutting the edges of soft objects such as
oil seals, soft rubber parts and U packing.
Manual feed and auto trim.
Cuts the bevel angle of plain face, inner & outer bevel angle
simultaneously.
Auto product blow off by air cylinder. Flash separator separates
trimmed oil seal and flash to save time.
It is equipped with a wheel press to press the oil seals being
trimmed
Area safety sensor and a safety screen to protect the operator and
keep the working area clean.
Because of its sophisticated design, the processing range is from
dia10mm to dia150mm, the size of
the thickness can be adjusted, so it can satisfy users’ requirement
of various varieties and a wide range.
If the machine has no grip of the work-piece, the knife won’t work,
so it can protect the operator,
and avert to mangle the knife.
2.Flow chart
Here is the flowchart:
Because of its sophisticated design, the processing range is from
dia10mm to dia150mm, the size of
the thickness can be adjusted, so it can satisfy users’ requirement
of various varieties and a wide
range.
If the machine has no grip of the work-piece, the knife won’t work,
so it can protect the operator,
and avert to mangle the knife.
3.Main Functions
1.This machine has nine ways to process. According to the actual
requirement, you can arbitrarily choose.
2.You can adjust the knife’s route and the speed. If you want to
adjust the two knives’ route, you just adjust the limit switch and
the hydraulic buffer which on the cylinder. You can control the
knife’s speed by adjusting the throttle which anchor the each end
of the cylinder. Adjustment of the knob on the tail of the elegance
fixed-speed devices can regulate the speed of the knife cutting
into the work-piece.
3.You can adjust the three knives’ cutting angle.
4.Accumulative total the quantity of the artifactitous product.
5.There is no grade to adjust the work-piece’s revolving speed.
6.Protection when it doesn’t grip the work-piece.
7.It has the function of collecting the work-piece automatically.
4.Parameter data:
Cutting Efficiency | More than 30 PCS/Min |
Working Rotate Speed | 0~3000r/min |
Cutting Precision | ≤±0.03mm |
Cutting Diameter | Φ5mm~Φ200mm |
Cutting Length | Standard≤100mm Stretched≤350mm |
Cutting Angle | Oilseal 20o~70o SealCUP 0o~90o |
Tool Specification | strip knife:3×3×60mm |
Power Consumption | 0.37KW |
Voltage | 220V |
Working Vacuum Degree | ≤-0.035MPa |
